Angle Plates & Angle Irons
Angle plates and angle irons from Suburban Tool give machinists a rigid, precision-ground 90-degree reference for holding and machining work perpendicular to a table or surface plate. Made in USA from stress-relieved cast iron, these angle plates are trusted across milling, grinding, layout, tool & die work, and QC/inspection where squareness and repeatability matter.
This category spans the complete Suburban angle plate line, from everyday shop sizes to heavy production fixtures. Choose the configuration that fits your setup:
- Plain and slotted angle plates
- Box angle irons
- Compound (adjustable) angle plates
- Giant angle plates for large parts
- Accessories for popular AP models
Whether you need a compact tapped-hole plate or a Giant Angle Plate for oversized work, browse and filter by type, size, or brand to match the right angle plate to your machine and application.
-
Angle Block Sets 14 productsThe Suburban Tool AB-10-ST angle block set gives machinists a complete range of precision angle blocks for setting, checking, and inspecting angles with gage-block accuracy. Individual blocks from 1/4° through 30°, plus quarter and half increments, stack together to build almost any angle you need, including a true 90 degree angle block reference.Made in the USA, these angle blocks are built for tool & die makers, QC inspectors, and grinding shops that demand exact angular setups. Buy the full set or add individual blocks to fill out your kit. Complete AB-10-ST precision angle block set Individual blocks from 1/4° to 30° plus fractions Stackable for right-angle and compound setups Made in USA angle blocks by Suburban Tool
-
Compound Angle Plates 2 productsThe Suburban Tool C-36 compound angle plate lets machinists set and hold workpieces at precise compound angles for grinding, machining, and inspection. Its ground, hardened faces provide a stable, accurate reference so you can position parts in two planes at once for demanding tool & die work.Made in the USA, this angle plate is built for machinists, tool & die makers, and QC inspectors who need dependable angular workholding. Available individually or as a matched metric pair for setups requiring mirrored fixturing. C-36 compound angle plate for two-plane setups Ground, hardened faces for accuracy Sold individually or as a matched pair Made in USA angle plate by Suburban Tool
-
Giant Slotted Webbed Angle Plates 6 productsSuburban Tool giant slotted webbed angle plates give you a massive, rigid right-angle reference for setup, layout, and machining of large workpieces. The heavy webbed construction resists deflection while slotted faces make clamping and fixturing fast, whether the part is being milled, ground, or inspected.Machinists, tool & die makers, and QC/inspection teams use these angle plates to hold work square to the table and check squareness on big components. Available in both milled and precision-ground versions and multiple large sizes, they bring dependable accuracy to demanding jobs. Made in USA. Heavy webbed, deflection-resistant construction Slotted faces for versatile clamping and fixturing Milled and precision-ground options Made in USA by Suburban Tool
-
T-Slotted Webbed Angle Plates 2 productsSuburban Tool T-Slotted Webbed Angle Plates provide a large, rigid 90-degree workholding surface for milling, grinding, layout and inspection. Reinforced with internal webbing and cut with full T-slots, these heavy-duty angle plates let machinists clamp sizable parts securely and set them square on the machine table or surface plate.Made in the USA, each webbed angle plate is precision-ground square and flat for the accuracy that tool & die makers and QC inspectors demand. When large right-angle setups call for a stout, dependable angle plate, Suburban Tool angle plates hold true under load. T-slotted webbed angle plates in large sizes Internal webbing for rigidity under heavy clamping Full T-slots and ground-square faces for accurate setups Made in the USA by Suburban Tool
-
Magna-Square Magnetic Angle Irons 1 productThe Suburban Tool Magna-Square magnetic angle iron is a precision-ground right-angle block with built-in magnetic holding that grips your workpiece on demand. It presents accurate 90-degree reference faces for holding parts square during grinding, layout, and inspection, then locks them in place with the flip of a lever.Machinists, tool & die makers, and QC/inspection teams use this magnetic angle iron to fixture parts vertically and check squareness without extra clamps. Compact and accurate, it streamlines toolroom setups. Made in USA. Precision-ground 90-degree reference faces On/off magnetic workholding Holds parts square for grinding and inspection Made in USA by Suburban Tool
-
Plain Webbed Angle Plates 28 productsSuburban Tool plain webbed angle plates give machinists, tool & die makers, and QC/inspection teams a rigid 90-degree reference for holding, layout, and inspection work. The webbed design adds stiffness while keeping the angle plate light enough to handle on the surface plate or machine table.This Made in USA collection includes both as-cast and precision-ground angle plates across many sizes. Plain webbed angle plates in ground and standard finishes Sizes from small 2" blocks to large 24" plates Accurate 90-degree reference faces Ideal for layout, setup, and inspection Whether you need a right angle plate for the surface plate or the milling machine, Suburban Tool builds them for lasting accuracy and rigidity. Videos Cast Iron Angle Plate Comparison - Suburban Tool vs Value Line
-
Precision Cubes 2 productsPrecision steel cubes from Suburban Tool provide machinists and QC inspectors with multiple mutually square faces for layout, setup, and inspection. Sized at 3-1/2" × 6" and available in inch and metric, each cube is hardened and precision-ground for accurate squareness reference on the surface plate.Made in the USA, these cubes are ideal for mounting indicators, checking squareness, and holding work at true right angles in tool & die and grinding applications. A durable, versatile addition to any inspection setup. Suburban Tool quality, Made in USA 3-1/2" × 6" in inch and metric Multiple precision-ground square faces For layout, squareness checks, and inspection
-
Precision Ground Steel Angle Plates 21 productsSuburban Tool precision ground steel angle plates deliver accurate, hardened 90-degree reference surfaces for machinists, tool & die makers, and QC/inspection teams. Ground on all faces, they excel at layout, workholding, and squareness checks on the surface plate, grinder, and machine table.This Made in USA collection covers a wide range of sizes, including hardened and matched-pair options. Precision ground steel angle plates in many sizes Hardened and non-hardened configurations Matched pairs available in inch and metric Accurate right angle references for setup and inspection When you need a dependable angle plate or right angle block, Suburban Tool grinds them for the flatness, squareness, and durability precision work requires.
-
Slotted Open End Angle Plates
-
Slotted Webbed Angle Plates
-
Taft-Peirce Box Angle Irons 1 productThe Taft-Peirce Box Angle Iron is a premium precision angle plate engineered for the most demanding metrology and tool & die setups. Ground square and parallel on all faces to Taft-Peirce's exacting standards, this box-style angle iron delivers a stable, dead-square reference for inspection, layout, and grinding.Distributed by Suburban Tool, Taft-Peirce angle irons bring generations of precision-tool heritage to QC labs and machinists who cannot compromise on squareness. Box-type angle iron for maximum rigidity and stability Precision ground square and parallel for inspection accuracy Ideal for metrology, layout, and grinding setups Premium Taft-Peirce quality, Made in USA
-
Taft-Peirce Duplex Angle Irons 4 productsTaft-Peirce Metrology Duplex Angle Irons are premium precision angle plates ground on two working faces to provide multiple square references from one fixture. Built to Taft-Peirce's metrology standards, these duplex angle irons give tool & die makers and QC/inspection labs a rigid, dead-square platform for layout, setup, and grinding.Offered through Suburban Tool, this collection includes standard and precision-ground versions in matched sizes for demanding inspection work. Duplex angle irons with multiple square reference faces Ground to exacting metrology standards Standard and precision-ground versions available Premium Taft-Peirce quality, Made in USA
-
Taft-Peirce Magnetic Angle Irons 1 productThe Taft-Peirce Magnetic Angle Iron is a premium precision angle plate with built-in magnetic holding, letting machinists clamp work square without external fixturing. Precision ground on its faces, it delivers a true 90-degree reference for grinding, layout, and inspection while the magnetic chuck holds parts securely.Available through Suburban Tool, this magnetic angle iron is a go-to for tool & die and QC work where quick, dead-square setups save time on the surface grinder. Magnetic angle iron for fixture-free square workholding Precision-ground 90-degree reference faces Ideal for grinding, layout, and inspection Premium Taft-Peirce quality, Made in USA
-
Taft-Peirce Measuring Irons 4 productsThese Taft-Peirce angle irons provide a rigid, square reference for holding and inspecting work at 90 degrees. Available standard or fully ground, they give machinists, tool & die makers, and inspectors a stable right-angle surface for layout, setup, and squareness checking on the surface plate.Supplied by Suburban Tool, each Taft-Peirce angle iron is Made in USA and precision machined for accurate angle plate work in the toolroom and QC lab. Precision angle irons in standard and ground finishes Rigid 90-degree reference for layout and inspection For machinists, tool & die, and quality control Premium Taft-Peirce precision, Made in USA
-
Taft-Peirce Pallet Irons 2 productsTaft-Peirce pallet irons serve as sturdy, precision-ground bases for mounting and locating work during inspection and toolroom setups. Offered in 8" and 10" sizes, they give machinists and QC inspectors a flat, dependable platform that works alongside angle plates and V-blocks on the surface plate.Available from Suburban Tool, these Taft-Peirce pallet irons are Made in USA and machined to close tolerances for accurate, repeatable fixturing in tool & die and inspection work. Precision pallet irons for mounting and locating work Available in 8" and 10" sizes Flat reference base for inspection and setup Premium Taft-Peirce precision, Made in USA
-
Taft-Peirce Slotted Angle Irons 14 productsTaft-Peirce webbed angle plates provide a rugged, slotted right-angle surface for mounting, clamping, and inspecting work at 90 degrees. The ribbed web design adds rigidity, while slots let machinists and tool & die makers bolt down parts securely for machining and layout.Offered in standard and ground finishes from 10" through 22" by Suburban Tool, each Taft-Peirce angle plate is Made in USA and precision machined for dependable squareness in the toolroom and QC lab. Webbed, slotted angle plates for clamping and layout Standard and ground finishes, 10" to 22" Rigid 90-degree reference for machining and inspection Premium Taft-Peirce precision, Made in USA
-
Taft-Peirce Toolmaker's Knees 2 productsThe Taft-Peirce toolmaker's knee is a precision-ground angle block that holds work square and steady for grinding, layout, and inspection. Its multiple reference faces let machinists and tool & die makers set parts at true 90 degrees on the surface plate or grinder.Available in standard and ground versions from Suburban Tool, each Taft-Peirce toolmaker's knee is Made in USA and machined to close tolerances for accurate, repeatable right-angle work in the toolroom and QC lab. Precision toolmaker's knees for square setups Standard and ground finishes available Multiple faces for grinding, layout, and inspection Premium Taft-Peirce precision, Made in USA
-
Taft-Peirce Universal Right Angle Irons 8 productsTaft-Peirce universal right angle irons give machinists and inspectors a versatile 90-degree reference for holding, clamping, and checking work on the surface plate. Multiple machined faces and mounting options make them adaptable for layout, machining setup, and squareness inspection.Offered in standard and ground finishes by Suburban Tool, each Taft-Peirce right angle iron is Made in USA and precision machined so tool & die makers and QC teams get a true, dependable right-angle block every time. Universal right angle irons for versatile setups Standard and ground finishes available 90-degree reference for layout and inspection Premium Taft-Peirce precision, Made in USA
-
Tool-Master Angle Plate Set 1 productThe Suburban Tool Tool-Master™ Angle Plate Set gives machinists a versatile precision angle plate system for milling, grinding, layout and inspection. This set delivers accurate 90-degree reference surfaces and flexible workholding in one package, ideal for tool & die makers, QC inspectors and grinding shops setting up angular and square work.Made in the USA, the Tool-Master set is precision-ground square and flat for the repeatable accuracy shops expect. When you want a complete right-angle setup solution rather than a single plate, Suburban Tool angle plates provide the precision and value to get the job done. Complete Tool-Master precision angle plate set Accurate 90-degree reference and versatile workholding For milling, grinding, layout and inspection Made in the USA by Suburban Tool
-
Universal Right Angle Irons 20 productsSuburban Tool Universal Right Angle Irons are precision cast iron angle plates that provide a true 90-degree reference for setup, layout, and inspection. Slotted and drilled for versatile clamping, each right angle block lets machinists and tool & die makers mount work square to the surface plate or machine table quickly and repeatably.This collection includes a wide range of sizes in as-cast and ground finishes, so you can match the angle plate to the accuracy your inspection or grinding job demands. True 90-degree angle plate reference for layout and QC Slotted faces for flexible workholding and fixturing As-cast and precision-ground versions available Made in USA by Suburban Tool
-
V-Step Angle Plates 5 productsThe Suburban Tool V-Step Angle Plate combines a precision angle plate with an integral vee, giving machinists a single fixture to hold both flat and cylindrical work square to the surface plate. It is a handy tool for layout, inspection, and grinding setups where round parts need to be located and clamped at 90 degrees.This collection offers the V-step angle plate in single blocks and matched pairs, including finished-and-certified options for demanding QC and tool & die work. Angle plate with integral V-step for round and flat parts Precision ground square and parallel Available singly or as matched pairs Made in USA by Suburban Tool Videos How to Use a V-Step Angle Plate
-
Value Line Precision Angle Plates 1 productValue Line Precision Ground Angle Plates deliver an accurate 90-degree reference for mounting, machining, and inspecting work at a right angle. Precision-ground faces keep parts square to the surface plate or machine table, making these angle plates a reliable, economical choice for exacting setups.Offered by Suburban Tool, this Value Line collection serves machinists, tool & die makers, and QC/inspection users who need dependable squareness without the premium price. Use a precision angle plate for layout, drilling, milling, and grinding whenever a true 90-degree datum matters. Value Line economy pricing for precision work Precision-ground angle plate for true 90-degree setups Keeps work square for milling, drilling, and grinding Ideal for machinists, tool & die, and QC inspection
-
Value Line Plain Webbed Angle Plates 16 productsValue Line Plain Webbed Angle Plates provide a rigid 90-degree reference for mounting and machining work at a right angle. The webbed construction adds stiffness while keeping weight down, giving machinists a stable, economical angle plate for milling, drilling, layout, and inspection.Supplied by Suburban Tool, this Value Line collection spans sizes from 2" x 2" up to 12" x 12" to suit small and large parts. A dependable choice for machinists, tool & die makers, and QC/inspection teams who need a true angle plate without premium cost. Value Line economy pricing across many sizes Rigid webbed angle plates from 2" to 12" True 90-degree reference for milling, drilling, and layout Ideal for machinists, tool & die, and QC inspection Videos Cast Iron Angle Plate Comparison - Suburban Tool vs Value Line
-
Value Line Slotted Open Angle Plates 14 productsValue Line Slotted Open Angle Plates combine a rigid 90-degree reference with an open, slotted design for fast, flexible workholding. The through slots let machinists clamp and bolt parts anywhere on the face, while the open construction reduces weight and clears fixturing for milling, drilling, and layout.Supplied by Suburban Tool, this Value Line collection ranges from 3" x 4" up to 6" x 10" to fit a variety of parts. An economical, shop-ready angle plate for machinists, tool & die makers, and QC/inspection users who need versatile right-angle setups. Value Line economy pricing across multiple sizes Open, slotted angle plates for flexible clamping True 90-degree reference for milling, drilling, and layout Ideal for machinists, tool & die, and QC inspection Videos Cast Iron Angle Plate Comparison - Suburban Tool vs Value Line
-
Value Line Slotted Webbed Angle Plates 15 productsValue Line Slotted Webbed Angle Plates pair a stiff, webbed body with through slots for secure, adjustable workholding at a true 90 degrees. The webbing adds rigidity for heavier cuts, while the slots let machinists clamp and bolt parts precisely where they are needed for milling, drilling, and inspection.Offered by Suburban Tool, this Value Line collection spans sizes from 2" x 3" up to 6" x 10" for small and large work alike. An economical, dependable angle plate for machinists, tool & die makers, and QC/inspection teams needing rigid right-angle setups. Value Line economy pricing in many sizes Rigid webbed angle plates with clamping slots True 90-degree reference for milling, drilling, and grinding Ideal for machinists, tool & die, and QC inspection Videos Cast Iron Angle Plate Comparison - Suburban Tool vs Value Line
-
Value Line Universal Right Angle Irons 20 productsValue Line Universal Right Angle Irons provide a versatile 90-degree reference for holding and machining work at a right angle. Slotted for flexible clamping, these angle irons act as a dependable right angle block for mounting parts to the machine table, surface plate, or fixture during milling, drilling, and layout.Supplied by Suburban Tool, this Value Line collection covers sizes from 4" up to 10" to handle a wide range of parts. An economical choice for machinists, tool & die makers, and QC/inspection users who need a true 90-degree angle block for setups and inspection. Value Line economy pricing across 20 sizes Universal slotted right angle irons for flexible clamping True 90-degree angle block for milling, drilling, and layout Ideal for machinists, tool & die, and QC inspection
-
Suburban Tool Standard Angles
-
Suburban Tool Giant Angle Plates 6 productsGiant angle plates from Suburban Tool provide a rigid, precision-ground 90° reference for large and heavy workpieces on the surface plate, mill, or grinder. Each plate is stress-relieved and ribbed for stability, then ground square and parallel so machinists, tool & die shops, and inspection departments can clamp, lay out, and machine oversized parts with confidence.This collection spans the full slotted and tapped giant angle plate range — from the GAS series up through the largest GAT sizes — all Made in USA to Suburban Tool's exacting flatness and squareness tolerances. Choose the working height and face size your job demands, or contact us for a custom configuration.


