•

The Suburban Tool MTC-LFP Magnetic Toolmaker's Chuck packs a 5-7/16" x 2-3/4" x 3" magnetic body into a toolroom-ready footprint built for surface grinding, inspection, and precision layout. Its 3/16" x 1/16" fine-pole construction is engineered to hold small or thin parts securely where a coarse chuck would let go.

Ground flat, square, and parallel, the MTC-LFP magnetizes on the top and bottom simultaneously, so you can reposition work fast. The bottom surface is relieved 1/8" to minimize loss of magnetism, and removable side and end rails let you fence and locate parts with confidence.

  • Fine 3/16" x 1/16" pole pitch grips small and thin workpieces
  • Top and bottom magnetize simultaneously for flexible setups
  • Removable side and end rails for accurate location
  • Bottom relieved 1/8" to preserve holding power
  • Ground flat, square, and parallel for repeatable results
  • Made in the USA by Suburban Tool
  • Model MTC-LFP has 3/16" x 1/16" fine pole construction for holding small or thin parts. It also includes removable side and end rails.
  • Not sealed against coolant.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool Inc.

Magnetic Toolmaker's Chuck (MTC-LFP)

SKU MTC-LFP
$1,063.75

The Suburban Tool MTC-LFP Magnetic Toolmaker's Chuck packs a 5-7/16" x 2-3/4" x 3" magnetic body into a toolroom-ready footprint built for surface grinding, inspection, and precision layout. Its 3/16" x 1/16" fine-pole construction is engineered to hold small or thin parts securely where a coarse chuck would let go.

Ground flat, square, and parallel, the MTC-LFP magnetizes on the top and bottom simultaneously, so you can reposition work fast. The bottom surface is relieved 1/8" to minimize loss of magnetism, and removable side and end rails let you fence and locate parts with confidence.

  • Fine 3/16" x 1/16" pole pitch grips small and thin workpieces
  • Top and bottom magnetize simultaneously for flexible setups
  • Removable side and end rails for accurate location
  • Bottom relieved 1/8" to preserve holding power
  • Ground flat, square, and parallel for repeatable results
  • Made in the USA by Suburban Tool
  • Model MTC-LFP has 3/16" x 1/16" fine pole construction for holding small or thin parts. It also includes removable side and end rails.
  • Not sealed against coolant.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model MTC-LFP
Single or Pair Single
Body Length 5-7/16"
Width 2-3/4"
Height 3"
90° Vee Capacity —
Flat, Square & Parallel 0.0005"
Weight 12 lb
$1,063.75

Add a certification?

The certificate is added to your cart as a separate line for this tool.

Allow up to 2 days for order processing. Items not in stock are made to order in Auburn Hills, Michigan; we email you the expected date, and they ship separately with their own shipping charge.

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool MTC-LFP Magnetic Toolmaker's Chuck packs a 5-7/16" x 2-3/4" x 3" magnetic body into a toolroom-ready footprint built for surface grinding, inspection, and precision layout. Its 3/16" x 1/16" fine-pole construction is engineered to hold small or thin parts securely where a coarse chuck would let go.

Ground flat, square, and parallel, the MTC-LFP magnetizes on the top and bottom simultaneously, so you can reposition work fast. The bottom surface is relieved 1/8" to minimize loss of magnetism, and removable side and end rails let you fence and locate parts with confidence.

  • Fine 3/16" x 1/16" pole pitch grips small and thin workpieces
  • Top and bottom magnetize simultaneously for flexible setups
  • Removable side and end rails for accurate location
  • Bottom relieved 1/8" to preserve holding power
  • Ground flat, square, and parallel for repeatable results
  • Made in the USA by Suburban Tool
  • Model MTC-LFP has 3/16" x 1/16" fine pole construction for holding small or thin parts. It also includes removable side and end rails.
  • Not sealed against coolant.

Available with No Certification, Short Form, or Long Form Certification.

You may also like

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote