•

The Suburban Tool MSP-186-FP-S2 is a 6" x 18" magnetic sine plate from the SineSet permanent magnetic line, with a long table that suits extended parts and multi-part angle setups. Marked FP for fine pole, its 1/8" poles and 1/8" separators produce shallow flux lines that grip small and thin work without lifting.

The magnetic chuck removes with just four bolts, letting you run the sine plate and chuck separately. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for dependable accuracy in surface grinding, layout, and inspection.

  • Fine pole spacing for secure holding of small and thin parts
  • Long 18" table for extended and multi-part setups
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool Inc.

Magnetic Sine Plate, 6" × 18" (MSP-186-FP-S2)

SKU MSP-186-FP-S2
Contact for Pricing

The Suburban Tool MSP-186-FP-S2 is a 6" x 18" magnetic sine plate from the SineSet permanent magnetic line, with a long table that suits extended parts and multi-part angle setups. Marked FP for fine pole, its 1/8" poles and 1/8" separators produce shallow flux lines that grip small and thin work without lifting.

The magnetic chuck removes with just four bolts, letting you run the sine plate and chuck separately. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for dependable accuracy in surface grinding, layout, and inspection.

  • Fine pole spacing for secure holding of small and thin parts
  • Long 18" table for extended and multi-part setups
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model MSP-186-FP-S2
Pole Spacing Fine
SineSet® Series S2
Length 18"
Width 6"
Height 6"
C 15" ±0.0003"
Square & Parallel 0.0004"
Weight 160 lb

Contact for Pricing

📞 Call (248) 391-7800 ✉ Email for a Quote

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool MSP-186-FP-S2 is a 6" x 18" magnetic sine plate from the SineSet permanent magnetic line, with a long table that suits extended parts and multi-part angle setups. Marked FP for fine pole, its 1/8" poles and 1/8" separators produce shallow flux lines that grip small and thin work without lifting.

The magnetic chuck removes with just four bolts, letting you run the sine plate and chuck separately. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for dependable accuracy in surface grinding, layout, and inspection.

  • Fine pole spacing for secure holding of small and thin parts
  • Long 18" table for extended and multi-part setups
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote