•

The Suburban Tool ESP-612-T-S2 is a 12" x 6" electromagnetic sine plate from the SineSet series, pairing a compact precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Built for small-part surface grinding, inspection and precision angle layout, it sets angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool Inc.

Electromagnetic Sine Plate, 12" × 6" (ESP-612-T-S2)

SKU ESP-612-T-S2
Contact for Pricing

The Suburban Tool ESP-612-T-S2 is a 12" x 6" electromagnetic sine plate from the SineSet series, pairing a compact precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Built for small-part surface grinding, inspection and precision angle layout, it sets angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model ESP-612-T-S2
SineSet® Series S2
Length 6"
Width 12"
Height 6-1/8"
C 5" ±0.0002"
Square & Parallel 0.0003"
Watts 72
Weight 122 lb

Contact for Pricing

📞 Call (248) 391-7800 ✉ Email for a Quote

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool ESP-612-T-S2 is a 12" x 6" electromagnetic sine plate from the SineSet series, pairing a compact precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Built for small-part surface grinding, inspection and precision angle layout, it sets angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote