•

The ESP-186-L-S2 Electromagnetic Sine Plate, 6" x 18", unites a longitudinal (lengthwise) pole electromagnetic chuck with a precision sine plate from Suburban Tool's SineSet series. The extra 18" length and lengthwise pole layout hold longer parts fast for compound-angle grinding, inspection, and layout.

The chuck is sealed against dirt and liquids for dependable toolroom service.

  • Sine plate and electromagnetic chuck can be used together or independently
  • Chuck removes or replaces quickly using only four bolts
  • Two self-storing, hardened and ground rails for the sine plate, plus two side rails for the chuck
  • Gage block rolls provide dual 0.200" minute steps for setting small angles with standard gage blocks
  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool Inc.

Electromagnetic Sine Plate, 6" × 18" (ESP-186-L-S2)

SKU ESP-186-L-S2
Contact for Pricing

The ESP-186-L-S2 Electromagnetic Sine Plate, 6" x 18", unites a longitudinal (lengthwise) pole electromagnetic chuck with a precision sine plate from Suburban Tool's SineSet series. The extra 18" length and lengthwise pole layout hold longer parts fast for compound-angle grinding, inspection, and layout.

The chuck is sealed against dirt and liquids for dependable toolroom service.

  • Sine plate and electromagnetic chuck can be used together or independently
  • Chuck removes or replaces quickly using only four bolts
  • Two self-storing, hardened and ground rails for the sine plate, plus two side rails for the chuck
  • Gage block rolls provide dual 0.200" minute steps for setting small angles with standard gage blocks
  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model ESP-186-L-S2
SineSet® Series S2
Length 18"
Width 6"
Height 6-5/8"
C 15" ±0.0003"
Square & Parallel 0.0004"
Watts 110
Weight 201 lb

Contact for Pricing

📞 Call (248) 391-7800 ✉ Email for a Quote

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The ESP-186-L-S2 Electromagnetic Sine Plate, 6" x 18", unites a longitudinal (lengthwise) pole electromagnetic chuck with a precision sine plate from Suburban Tool's SineSet series. The extra 18" length and lengthwise pole layout hold longer parts fast for compound-angle grinding, inspection, and layout.

The chuck is sealed against dirt and liquids for dependable toolroom service.

  • Sine plate and electromagnetic chuck can be used together or independently
  • Chuck removes or replaces quickly using only four bolts
  • Two self-storing, hardened and ground rails for the sine plate, plus two side rails for the chuck
  • Gage block rolls provide dual 0.200" minute steps for setting small angles with standard gage blocks
  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote