-
files/MSPC-126-FP-S2_20SineSet_20Permanent_20Magnetic_20Compound_20Sine_20Plate_82a6ff23-e945-4499-9e41-4715b444ebc4.jpg
-
files/MSPC-DWG_20SineSet_20Permanent_20Magnetic_20Compound_20Sine_20Plate_20Drawing_7b25f008-3efb-4191-ac1a-da24f691787e.jpg
The MSPC-1218-FP-S2 Compound Sine Plate, 12" x 18", from Suburban Tool is a SineSet permanent magnetic compound sine plate for precise compound-angle grinding and inspection. Its permanent magnetic chuck can be quickly removed or replaced using only four bolts, so the compound sine plate and chuck can be used together or independently.
The fine-pole (-FP) chuck uses 1/8" poles and 1/8" separators to produce shallow flux lines ideal for holding small and thin parts.
- Fine-pole chuck secures small, thin workpieces on the ground surface
- Chuck lifts off with four bolts for independent chuck or sine-plate use
- Lubricated and sealed against dirt and liquids for a long service life
- Includes removable handle, chuck rails, two locking straps, and self-storing hardened, ground rails
- Gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets
- Compound sine plate portion is made of steel hardened to Rc 58-60
- Made in the USA by Suburban Tool
- The gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets.
- The compound sine plate portion is made of steel, hardened to Rc 58-60.
Available with No Certification, Short Form, or Long Form Certification.
The MSPC-1218-FP-S2 Compound Sine Plate, 12" x 18", from Suburban Tool is a SineSet permanent magnetic compound sine plate for precise compound-angle grinding and inspection. Its permanent magnetic chuck can be quickly removed or replaced using only four bolts, so the compound sine plate and chuck can be used together or independently.
The fine-pole (-FP) chuck uses 1/8" poles and 1/8" separators to produce shallow flux lines ideal for holding small and thin parts.
- Fine-pole chuck secures small, thin workpieces on the ground surface
- Chuck lifts off with four bolts for independent chuck or sine-plate use
- Lubricated and sealed against dirt and liquids for a long service life
- Includes removable handle, chuck rails, two locking straps, and self-storing hardened, ground rails
- Gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets
- Compound sine plate portion is made of steel hardened to Rc 58-60
- Made in the USA by Suburban Tool
- The gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets.
- The compound sine plate portion is made of steel, hardened to Rc 58-60.
Available with No Certification, Short Form, or Long Form Certification.
Specifications
| Model | MSPC-1218-FP-S2 |
|---|---|
| Pole Spacing | Fine |
| SineSet® Series | S2 |
| Length | 18" |
| Width | 12" |
| Height | 8" |
| C1 | 15" ±0.0003" |
| C2 | 10" ±0.0003" |
| Square & Parallel | 0.0004" |
| Weight | 417 lb |
Contact for Pricing
∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology