•

The Suburban Tool MSP-66 is a 6" x 6" magnetic sine plate from the SineSet permanent magnetic line, a versatile square-table fixture for precise angle setups on the surface grinder. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts firmly.

The magnetic chuck removes with just four bolts, so the sine plate and chuck can be used independently. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for lasting accuracy in grinding, layout, and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool

Permanent Magnetic Sine Plate, 6" × 6" (MSP-66)

SKU MSP-66
$2,914.80

The Suburban Tool MSP-66 is a 6" x 6" magnetic sine plate from the SineSet permanent magnetic line, a versatile square-table fixture for precise angle setups on the surface grinder. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts firmly.

The magnetic chuck removes with just four bolts, so the sine plate and chuck can be used independently. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for lasting accuracy in grinding, layout, and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model MSP-66
Pole Spacing Standard
SineSet® Series —
Length 6"
Width 6"
Height 4-1/4"
C 5" ±0.0002"
Square & Parallel 0.0002"
Weight 35 lb
$2,914.80

Add a certification?

The certificate is added to your cart as a separate line for this tool.

Allow up to 2 days for order processing. Items not in stock are made to order in Auburn Hills, Michigan; we email you the expected date, and they ship separately with their own shipping charge.

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool MSP-66 is a 6" x 6" magnetic sine plate from the SineSet permanent magnetic line, a versatile square-table fixture for precise angle setups on the surface grinder. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts firmly.

The magnetic chuck removes with just four bolts, so the sine plate and chuck can be used independently. The chuck is lubricated and sealed against dirt and coolant, and the sine plate portion is hardened steel at Rc 58-60 for lasting accuracy in grinding, layout, and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

You may also like

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote