-
files/MSP-66-S1_0eefeb78-0cef-4979-8327-ab67ed839509.jpg
-
files/MSP-DWG_20SineSet_20Permanent_20Magnetic_20Sine_20Plate_20Drawing_cbd72bb1-4221-412d-91d5-2b8c7f4ac07c.jpg
The Suburban Tool MSP-1812-S2 is a 12" x 18" magnetic sine plate from the SineSet permanent magnetic series, designed for surface grinding, layout, and inspection where accurate angles must be set and held on a rigid magnetic base. As a standard-pole model, its 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts with authority.
The sine plate portion is made of steel, hardened to Rc 58-60, and the magnetic chuck removes or replaces with just four bolts, letting you run the sine plate and chuck separately.
- Deep-flux standard poles lock down heavy, thick workpieces during grinding
- Gage block roll with two 0.200" minute steps sets small angles using standard gage block sets
- Chuck is lubricated and sealed against dirt and coolant for long service life
- Ships with a locking strap and two self-storing, hardened and ground rails
- Four-bolt chuck doubles as a stand-alone magnetic chuck for other jobs
- Made in the USA by Suburban Tool
- A removable handle, a locking strap, and two rails are included with each chuck.
Available with No Certification, Short Form, or Long Form Certification.
The Suburban Tool MSP-1812-S2 is a 12" x 18" magnetic sine plate from the SineSet permanent magnetic series, designed for surface grinding, layout, and inspection where accurate angles must be set and held on a rigid magnetic base. As a standard-pole model, its 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts with authority.
The sine plate portion is made of steel, hardened to Rc 58-60, and the magnetic chuck removes or replaces with just four bolts, letting you run the sine plate and chuck separately.
- Deep-flux standard poles lock down heavy, thick workpieces during grinding
- Gage block roll with two 0.200" minute steps sets small angles using standard gage block sets
- Chuck is lubricated and sealed against dirt and coolant for long service life
- Ships with a locking strap and two self-storing, hardened and ground rails
- Four-bolt chuck doubles as a stand-alone magnetic chuck for other jobs
- Made in the USA by Suburban Tool
- A removable handle, a locking strap, and two rails are included with each chuck.
Available with No Certification, Short Form, or Long Form Certification.
Specifications
| Model | MSP-1812-S2 |
|---|---|
| Pole Spacing | Standard |
| SineSet® Series | S2 |
| Length | 18" |
| Width | 12" |
| Height | 6" |
| C | 15" ±0.0003" |
| Square & Parallel | 0.0004" |
| Weight | 318 lb |
Contact for Pricing
∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology