•

The Suburban Tool MSP-126-S2 is a 6" x 12" magnetic sine plate from the SineSet permanent magnetic line, offering ample table area for precise angle grinding and layout. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts securely.

On this SineSet model the magnetic chuck lifts off with just four bolts, so the sine plate and chuck can each be used independently. The chuck is lubricated and sealed against dirt and coolant, while the hardened Rc 58-60 steel sine plate keeps its accuracy through years of surface grinding and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool

Permanent Magnetic Sine Plate, 6" × 12" (MSP-126-S2)

SKU MSP-126-S2
Contact for Pricing

The Suburban Tool MSP-126-S2 is a 6" x 12" magnetic sine plate from the SineSet permanent magnetic line, offering ample table area for precise angle grinding and layout. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts securely.

On this SineSet model the magnetic chuck lifts off with just four bolts, so the sine plate and chuck can each be used independently. The chuck is lubricated and sealed against dirt and coolant, while the hardened Rc 58-60 steel sine plate keeps its accuracy through years of surface grinding and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model MSP-126-S2
Pole Spacing Standard
SineSet® Series S2
Length 12"
Width 6"
Height 5-1/4"
C 10" ±0.0002"
Square & Parallel 0.0003"
Weight 87 lb

Contact for Pricing

📞 Call (248) 391-7800 ✉ Email for a Quote

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool MSP-126-S2 is a 6" x 12" magnetic sine plate from the SineSet permanent magnetic line, offering ample table area for precise angle grinding and layout. Its standard pole chuck pairs 1/4" poles with 1/8" separators to produce deep flux lines that hold large and thick parts securely.

On this SineSet model the magnetic chuck lifts off with just four bolts, so the sine plate and chuck can each be used independently. The chuck is lubricated and sealed against dirt and coolant, while the hardened Rc 58-60 steel sine plate keeps its accuracy through years of surface grinding and inspection work.

  • Standard pole spacing for deep holding power on large, thick parts
  • Quick-change chuck removes with four bolts
  • Gage block roll with two 0.200" minute steps for setting small angles
  • Includes a locking strap and two self-storing, hardened and ground rails
  • Made in the USA by Suburban Tool
  • A removable handle, a locking strap, and two rails are included with each chuck.

Available with No Certification, Short Form, or Long Form Certification.

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote