-
files/MSP-66-S1_97c361f1-6071-4da5-a88a-a78ff8d8acd8.jpg
-
files/MSP-DWG_20SineSet_20Permanent_20Magnetic_20Sine_20Plate_20Drawing_60955a15-6053-4f86-b7f9-4553a438f0f6.jpg
The Suburban Tool MSP-1224-S2 is a 24" x 12" magnetic sine plate from the SineSet permanent magnetic line, sized to bring precise angle setups and dependable magnetic workholding to the largest jobs on your surface grinder. Its standard pole chuck combines 1/4" poles with 1/8" separators to produce deep flux lines that lock down large and thick workpieces.
On this SineSet model the magnetic chuck removes with just four bolts, so the sine plate and chuck can each be used on their own. The chuck is lubricated and sealed against dirt and coolant, while the hardened Rc 58-60 steel sine plate holds its accuracy through years of toolroom, grinding, and layout work.
- Standard pole spacing for deep, secure holding on large, heavy parts
- Quick-change chuck removes with four bolts for flexible setups
- Gage block roll with two 0.200" minute steps for setting small angles
- Includes a locking strap and two self-storing, hardened and ground rails
- Made in the USA by Suburban Tool
- A removable handle, a locking strap, and two rails are included with each chuck.
Available with No Certification, Short Form, or Long Form Certification.
The Suburban Tool MSP-1224-S2 is a 24" x 12" magnetic sine plate from the SineSet permanent magnetic line, sized to bring precise angle setups and dependable magnetic workholding to the largest jobs on your surface grinder. Its standard pole chuck combines 1/4" poles with 1/8" separators to produce deep flux lines that lock down large and thick workpieces.
On this SineSet model the magnetic chuck removes with just four bolts, so the sine plate and chuck can each be used on their own. The chuck is lubricated and sealed against dirt and coolant, while the hardened Rc 58-60 steel sine plate holds its accuracy through years of toolroom, grinding, and layout work.
- Standard pole spacing for deep, secure holding on large, heavy parts
- Quick-change chuck removes with four bolts for flexible setups
- Gage block roll with two 0.200" minute steps for setting small angles
- Includes a locking strap and two self-storing, hardened and ground rails
- Made in the USA by Suburban Tool
- A removable handle, a locking strap, and two rails are included with each chuck.
Available with No Certification, Short Form, or Long Form Certification.
Specifications
| Model | MSP-1224-S2 |
|---|---|
| Pole Spacing | Standard |
| SineSet® Series | S2 |
| Length | 12" |
| Width | 24" |
| Height | 6-5/8" |
| C | 10" ±0.0004" |
| Square & Parallel | 0.0005" |
| Weight | 475 lb |
Contact for Pricing
∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology