•

The Suburban Tool ESP-618-T-S2 is an 18" x 6" electromagnetic sine plate from the SineSet series, pairing a narrow precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Its long, narrow footprint suits surface grinding, inspection and precision angle layout, setting small angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Suburban Tool

Electromagnetic Sine Plate, 18" × 6" (ESP-618-T-S2)

SKU ESP-618-T-S2
Contact for Pricing

The Suburban Tool ESP-618-T-S2 is an 18" x 6" electromagnetic sine plate from the SineSet series, pairing a narrow precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Its long, narrow footprint suits surface grinding, inspection and precision angle layout, setting small angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

Specifications

Model ESP-618-T-S2
SineSet® Series S2
Length 6"
Width 18"
Height 6-7/8"
C 5" ±0.0002"
Square & Parallel 0.0004"
Watts 130
Weight 207 lb

Contact for Pricing

📞 Call (248) 391-7800 ✉ Email for a Quote

∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology ∼ Made in Auburn Hills, Michigan ∼ America’s Toolmaker for 60+ Years ∼ Precision Workholding & Metrology

The Suburban Tool ESP-618-T-S2 is an 18" x 6" electromagnetic sine plate from the SineSet series, pairing a narrow precision sine plate with a sealed transverse-pole electromagnetic chuck. Run them together for angled magnetic workholding or use each component on its own.

Its long, narrow footprint suits surface grinding, inspection and precision angle layout, setting small angles reliably with standard gage blocks.

  • Angular accuracy guaranteed within 5 seconds of arc up to 15 degrees, 10 seconds up to 30 degrees, and 15 seconds up to 45 degrees
  • Gage block rolls provide dual 0.200" minute steps for fine angle setting
  • Sealed against dirt and liquids; the chuck lifts off with only four bolts
  • Includes two self-storing hardened and ground sine-plate rails plus two chuck side rails
  • Made in the USA by Suburban Tool
  • Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part to be held.
  • Chuck controls must be used with all electromagnetic chucks!.

Available with No Certification, Short Form, or Long Form Certification.

See It In Action

  • Made in Auburn Hills, Michigan

    Precision workholding and metrology since the 1960s

  • UPS shipping on tools 80 lb and under

    Heavier tools are quoted by phone

  • Questions? Call (248) 391-7800

    Or email tools@subtool.com for a quote