Suburban Tool, Inc.
Taft-Peirce Metrology

Workholding & Inspection Equipment

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

Throughout this website you will see some part numbers with the suffix "S0", "S1" or "S2". This indicates that these tools are part of the Suburban SineSet system. As part of the system, tools with the same suffix can be bolted together without the use of clamps and with little or no indicating, forming a different tool. An example of this system would be the SP-66-S1 sine plate and the MC-66-S1 magnetic chuck; separately they are a standard sine plate and a squaring chuck, bolted together they become a magnetic sine plate. In addition to the magnetic chucks there are angle plates, v-blocks, vises and index fixtures that will mount to the sine plates. Just match up the part number suffix to get the proper sine plate for the tools you need.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.