Suburban Tool Logo Suburban Tool, Inc.
Login In
New Customer? Register Here


N/C VISES
PROUDLY MADE IN OUR FACILITY IN THE U.S.A.
Made in the USA
ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


V-612-NC NC Vise - Showing Bi-Directional Keyways
V-612-NC
(SHOWING BI-DIRECTIONAL KEYWAYS)
V-612-NC N/C Vise
V-612-NC
Suburban Tool N/C Vise Drawing
  • Precision vises designed to bolt easily onto your N/C, milling, or other machine.
     
  • Bi-directional 11/16" keyways ground in the bottom to allow rapid installation and automatic alignment.
     
  • Slotted on all four sides to provide a multitude of clamping possibilities.
     
  • Both fixed and movable jaws are stepped to permit the effortless holding of pieces as small as 1/2" x 1/2".
     
  • Angled center channel provides extra holding capacity.
     
  • Movable jaw pulls into base at 45 to 60° to insure maximum holding power and hold down force, eliminating tilting and lifting.
     
  • Made of steel hardened to Rc 58-60.
MODEL # SINGLE
or PAIR
L W H J JAW
CAPACITY
SQUARE &
PARALLEL
WT (#) PRICE
(US$)
V-411-NC SINGLE 11" 4" 3" 1-7/16" 7-1/2" 0.0003" 19
$ 1,151
V-411-NC-M PAIR 11" 4" 3" 1-7/16" 7-1/2" 0.0003" 38
$ 2,543
V-612-NC SINGLE 12" 6" 3-7/16" 1-11/16" 8-1/2" 0.0003" 38
$ 1,631
V-612-NC-M PAIR 12" 6" 3-7/16" 1-11/16" 8-1/2" 0.0003" 76
$ 3,630
PRODUCT CERTIFICATIONS
Long Form Certification
  • A form showing the advertised sizes and/or tolerances.
     
  • The actual measurements taken of those sizes and/or tolerances.
     
  • A statement that the standards used to measure the tool are traceable to the National Institute of Standards and Technology.
Short Form Certification
  • A form certifying that the specified product met manufacturer's specifications before leaving our factory.
MODEL # DESCRIPTION WT(#) PRICE
(US$)
CERT-LONG Certification - Long 0
$ 98
CERT-SHORT Certification - Short 0
0
Need Repair Parts? Click below:
Vise Parts List
V-411-NC
Vise Parts List
V-612-NC
By using this site you agree to our Privacy &Security Policy, Sales Policy Website Terms of Use Policy

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326
Phone: (248)391-7800 Fax: (248)391-7462 E-mail: tools@subtool.com
Copyright © 2001-2018 - Suburban Tool, Inc. All rights reserved. All trademarks and logos shown are the property of their respective owners.