Suburban Tool, Inc. Taft-Peirce Metrology Workholding & Inspection Equipment

SEARCH KEYWORDS

3-AXIS REFERENCE SQUARE

PROUDLY MADE IN OUR FACILITY IN THE U.S.A. ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

The perfect tool for checking all three axes of machining centers and coordinate measuring machines.   Used in applications where there is a need to check horizontal and/or vertical alignment.   Made from class 35-40 cast iron.   Tolerances of all working surfaces are held square to one another within 0.0003” overall.

MODEL # LENGTH WIDTH EDGE THICKNESS SQUARE WT (#) 9314 40" 24" 2" 0.0003" 180

Six Quick Steps to Check X, Y & Z Alignment    1.  Square measuring iron to table X axis, using t-slot.    2.  Track X axis along reference iron with spindle/probe to determine squareness.    3.  Adjust X travel to fall within established tolerance.    4.  Track Y axis to determine squareness of X and Y positions.    5.  Place measuring iron in vertical position on table.    6.  Track vertical surface with a spindle/probe to determine squareness of Z to X and Y (table).

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2010 - Suburban Tool, Inc.     All rights reserved. All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326 Phone:  (248) 391-7800     Fax:  (248) 391-7462 E-mail:   tools@subtool.com