Suburban Tool Logo Suburban Tool, Inc.
Taft-Peirce Metrology


Workholding & Inspection Equipment

SEARCH KEYWORDS             

  
VACUUM SINE PLATE CHUCKS
PROUDLY MADE IN THE U.S.A.
U.S. Flag
ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


VC-66-S1 SineSet Vacuum Sine Plate Chuck
VC-66-S1
 
  • Provides an excellent means for holding non-magnetic workpieces for light machining or grinding.
     
  • Designed to bolt directly to a SineSet® sine plate or compound sine plate of the same size & series with little or no indicating.
     
  • Each chuck has three 1/4 NPT holes for mounting the vacuum gage, relief valve and hose fitting.
     
  • The vacuum gage and relief valve included.
     
  • All chucks have back and end rails for positive location of workpieces.
MODEL # SineSet®
SERIES
LENGTH WIDTH HEIGHT SQUARE &
PARALLEL
RECOMMENDED
PUMP SIZE
WT (#)
VC-66-S1 S1 6" 6" 2-1/4" 0.0002" 1/4 H.P. OR LARGER 15
VC-612-S2 S2 12" 0.0003" 1/2 H.P. OR LARGER 28
VC-618-S2 18" 0.0004" 41


!!!!!     FOR IMPORTANT HOLDING POWER INFORMATION CLICK HERE     !!!!!
VACUUM PUMPS
VCP-34-MM 3/4 H.P. Vacuum Pump
VCP-34-MM
  • All models are the oilless, motor-mount, rotary vane design for maximum performance with minimum upkeep.
     
  • Each unit has internal mufflers and filters.  The filters were specifically designed to be easily removed and replaced.
     
  • The pumps have built-in thermal overload protection.
     
  • Each model includes a support base, the proper fittings and six feet of reinforced hose.
MODEL# ELECTRIC MOTOR CFM FREE AIR MAXIMUM
VACUUM
WT (#)
Free Flow at 10" Hg at 20" Hg
VCP-14-MM 1/4 HP, 110-115/208-230V, 60 Hz, 1 Phase 4.5 2.6 1.0 10 PSI 32
VCP-34-MM 3/4 HP, 110-115/208-230V, 60 Hz, 1 Phase 8.0 5.0 2.4 54


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIAL SIZES AVAILABLE UPON REQUEST

Copyright © 2001-2009 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.
American Express Logo Discover Card Logo 4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:   tools@subtool.com
Master Card Logo Visa Card Logo