Suburban Tool, Inc.
Taft-Peirce Metrology


Workholding & Inspection Equipment

                           SEARCH KEYWORDS

  

PRECISION VISES

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


V-612 Precision Vise
V-612
  V-237-S1 Precision Vise on SPC-66-S1 Compound Sine Plate
V-237-S1 on SPC-66-S1
Precision Vise Drawing
  • High precision, solid one-piece steel construction with body and jaws hardened to Rc 58-62.
     
  • Angled center channel provides extra jaw capacity.
     
  • Movable jaw pulls into base at 45 to 60° to insure maximum holding power and hold down force, eliminating tilting and lifting.
     
  • V-237 models have a ratchet mechanism with notched pockets and one-piece drawbar.
     
  • Jaw can be opened and closed without unbolting vise from work surface.
     
  • End pockets for convenient clamping on V-237 models and larger.
     
  • V-237 models and smaller have horizontal and vertical vees in the movable jaw. In addition, the "J" models have vees in the tops of the jaws and 1/8" x 1/8" steps at the top inside face of the jaws.
MODEL # SineSet®
SERIES
L W H J JAW
CAPACITY
SQUARE &
PARALLEL
WT (#)
SineSet® COMPATIBLE
V-225-S0 S0 5-7/8" 2" 2" 1" 3-1/4" 0.0002" 6
V-237-J-S1 S1 7-1/2" 3" 2-5/8" 1-5/16" 5" 12
V-237-S1 4-3/4" 11
V-411-S2 S2 11" 4" 3" 1-7/16" 7" 0.0003" 20
V-612-S2 12" 6" 3-7/16" 1-11/16" 8" 40
 NOT SineSet® COMPATIBLE

V-225

-- 5-7/8" 2" 2" 1" 3-1/4" 0.0002" 6
V-237 7-1/2" 3" 2-5/8" 1-5/16" 4-3/4" 11
V-237-J 5" 12
V-411 11" 4" 3" 1-7/16" 7" 0.0003" 20
V-612 12" 6" 3-7/16" 1-11/16" 8" 40



SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIAL SIZES AVAILABLE UPON REQUEST

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:  tools@subtool.com