Suburban Tool, Inc.
Taft-Peirce Metrology


Workholding & Inspection Equipment

                           SEARCH KEYWORDS

  

SINE VISES

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


SV-337 Sine Vise
SV-337
Sine Vise Drawing
 
  • Provides a quick and accurate means of holding a workpiece at an angle for grinding or inspection.
     
  • Angled center channel provides extra holding capacity.
     
  • Solid, one-piece body.
     
  • Made from steel, hardened to Rc 58-62.
     
  • Movable jaw pulls into base at 45 to 60° to insure maximum holding power and hold down force, eliminating tilting and lifting.
     
  • Dual 0.200" minute steps built into the gage roll allow setting small angles with standard gage blocks.
     
  • SV-337 models have small horizontal and vertical vees in the movable jaw and a ratchet mechanism with notched pockets and a one-piece drawbar.
     
  • One locking strap included with each sine vise.
MODEL # SineSet®
SERIES
L W H J JAW
CAPACITY
C SQUARE &
PARALLEL
WT(#)
SineSet® COMPATIBLE
SV-337-S1 S1 7-1/2" 3" 3-5/8"   4-3/4" 5.000" ±0.0002" 0.0002" 17
SV-411-S2 S2 11" 4" 4-5/8"   7" 10.000" ±0.0002" 0.0003" 39
SV-612-S2 12" 6" 5-1/8"   8" 60
 NOT SineSet® COMPATIBLE
SV-337 -- 7-1/2" 3" 3-5/8"   4-3/4" 5.000" ±0.0002" 0.0002" 17
SV-411 11" 4" 4-5/8"   7" 10.000" ±0.0002" 0.0003" 39
SV-612 12" 6" 5-1/8"   8" 60


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:  tools@subtool.com