SineSet PERMANENT MAGNETIC SINE PLATE CHUCKS by Suburban Tool, Inc.

Suburban Tool, Inc.
Taft-Peirce Metrology

Workholding & Inspection Equipment

PERMANENT MAGNETIC SINE PLATE CHUCKS

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

MC-66-S1

MC-612-FP-S2

Models with the suffix "S0, S1 or S2" are part of the SineSet^® System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet^® sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate.
Can be used alone as a parallel chuck. The 4" x 4", 6" x 6" and 9" x 9" models can be used as squaring chucks.
Made with ceramic magnets for superior holding power.
Chucks are lubricated and sealed against dirt and liquids.
Includes removable handle, side and back rails.

STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts.
FINE POLE (marked -FP): 1/8" poles and 1/8" separators produce shallow flux lines for holding small and thin parts.

MODEL #		SineSet^® SERIES	LENGTH	WIDTH	HEIGHT	SQUARE & PARALLEL	WT(#)
STANDARD	FINE POLE	SineSet^® SERIES	LENGTH	WIDTH	HEIGHT	SQUARE & PARALLEL	STANDARD	FINE POLE
SineSet^® COMPATIBLE
--	MC-44-FP-S0	S0	4"	4"	2-5/8"	0.0002"	--	12
MC-66-S1	MC-66-FP-S1	S1	6"	6"		0.0002"	21	25
MC-612-S2	MC-612-FP-S2	S2	12"			0.0003"	42	47
MC-618-S2	MC-618-FP-S2		18"				65	70
MC-812-S2	MC-812-FP-S2		12"	8"			58	63
MC-1212-S2	MC-1212-FP-S2		12"	12"			100	106
MC-1218-S2	MC-1218-FP-S2		18"			0.0004"	151	160
MC-1224-S2	MC-1224-FP-S2		24"			0.0004"	202	212
NOT SineSet^® COMPATIBLE (SQUARING CHUCK ONLY)
--	MC-36-FP	--	6"	3"	2-5/8"	0.0002"	--	13
MC-99	MC-99-FP	--	9"	9"	2-5/8"	0.0004"	49	53

!!!!! FOR IMPORTANT HOLDING POWER INFORMATION CLICK HERE !!!!!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326
Phone: (248) 391-7800 Fax: (248) 391-7462
E-mail: tools@subtool.com