Suburban Tool, Inc. Taft-Peirce Metrology Workholding & Inspection Equipment

SEARCH KEYWORDS

LIFT-MASTER™ PERMANENT MAGNETIC LIFTS

PROUDLY MADE IN OUR FACILITY IN THE U.S.A. ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

Allows one person to do the material loading and handling that once required two or more.   Quick-release handle disengages the lift with a simple cam action.   Uses ceramic magnets to ensure powerful holding force, with no chance for demagnetization.   Grips and holds any ferrous material instantly.   Designed for efficient, trouble-free, low maintenance service

* See precautions and derating factors below. MODEL LENGTH WIDTH HEIGHT MAXIMUM LIFTING CAPACITY (#) * WT(#) LM-800 6-5/8" 3-3/8" 2-1/2" 800 20 LM-1600 8-1/2" 4-7/8" 1600 30 LM-3000 11-1/4" 6-3/8" 3000 45

MAGNETIC LIFT SAFETY

Never use to lift round material.   Never stand under a load being lifted.   Always use extra caution.   Only use magnetic lifts on material that doesn't flex or bend.   The surface of the lift and the load need to be clean and free of chips, oil, slag, dirt, etc.   Not recommended for painted or finish coated surfaces.   Two or more lifts are required, when lifting sheets over 8 feet long.

DERATING FACTORS

Thin work piece - derate by 25% at 3/4" and derate by 65% at 1/4" material thickness.   Rust or scale on surface of work piece -derate by 25%.   Irregular or rough surface - derate by 50%.   High carbon, high chromium or cast iron material - derate by 50%.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2010 - Suburban Tool, Inc.     All rights reserved. All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326 Phone:  (248) 391-7800     Fax:  (248) 391-7462 E-mail:   tools@subtool.com