Suburban Tool, Inc. Taft-Peirce Metrology Workholding & Inspection Equipment

SEARCH KEYWORDS

ELECTROMAGNETIC SINE PLATE CHUCKS

PROUDLY MADE IN OUR FACILITY IN THE U.S.A. ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

EMC-612-T-S2

Designed to bolt directly, with little or no indicating, to a SineSet® sine plate or compound sine plate of the same size & series.   Top plates are laminated from 1/8” steel & 1/16” stainless steel, then furnace-brazed to form one solid piece.   All units are sealed against dirt & liquids.   Longitudinal (lengthwise) or transverse (crosswise) poles are available, based on the size & shape of the part being held.   Chuck controls must be used with all electromagnetic chucks!   Two rails are included with each chuck.

TRANSVERSE POLE MODELS MODEL # SineSet® SERIES LENGTH WIDTH HEIGHT WATTS WT. (#) EMC-612-T-S2 S2 12" 6" 3-1/2" 72 75 EMC-618-T-S2 18" 130 117 EMC-1218-T-S2 12" 225 225 EMC-1224-T-S2 24" 280 310

LONGITUDINAL POLE MODELS MODEL SineSet® SERIES LENGTH WIDTH HEIGHT WATTS WT. (#) EMC-612-L-S2 S2 12" 6" 3-1/4" 56 75 EMC-618-L-S2 18" 110 117 EMC-1218-L-S2 12" 150 225 EMC-1224-L-S2 24" 200 310

!!!!!     FOR IMPORTANT HOLDING POWER INFORMATION CLICK HERE     !!!!!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2010 - Suburban Tool, Inc.     All rights reserved. All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326 Phone:  (248) 391-7800     Fax:  (248) 391-7462 E-mail:   tools@subtool.com