Suburban Tool, Inc. Taft-Peirce Metrology Workholding & Inspection Equipment

SEARCH KEYWORDS

MASTER-SINE™ COMPOUND SINE PLATES FORMERLY BY EX-CELL-0 / ROBBINS

PROUDLY MADE IN OUR FACILITY IN THE U.S.A. ASK OUR COMPETITION IF THEY CAN SAY THE SAME.

A-5-SP

A-10-SP

Master-Sine™ compound sine plates provide a sturdy and accurate way to grind or measure angles.   Made of steel, hardened to Rc 58-60.   A-5-SP has 1/4-20 tapped holes.  The remaining models have 5/16-18.   The roll bar is made from hardened steel, ground and lapped for straightness and roundness.   Swivel block provides full face contact with gage blocks keeping them securely in place.   Exclusive locking device inside the hinge roll provides a positive lock with an expanding action.  Both screws lock toward the front of the unit, pulling the top plate down on the set-up gage blocks without distortion.  Hinge is made from hardened steel, ground and lapped.   Angular accuracy of set-ups is guaranteed to be within 5 seconds of arc up to 15°, 10 seconds up to 30° and 15 seconds up to 45°.   Side and back rail included.

MODEL # L W H C1 C2 SQUARE & PARALLEL WT(#) A-5-SP 6-1/2" 6-1/2" 3-3/4" 5" ±0.0002" 5" ±0.0002" 0.0002" 30  A-10-SP 12-1/2" 7-3/4" 4-5/8" 10" ±0.0002" 0.0003" 80 A-15-SP 18-1/4" 6-3/4" 5-3/4" 15" ±0.0003" 0.0004" 145

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2009 - Suburban Tool, Inc.     All rights reserved. All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, MI 48326 Phone:  (248) 391-7800     Fax:  (248) 391-7462 E-mail:   tools@subtool.com

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL SIZES AVAILABLE UPON REQUEST

Copyright © 2001-2010 - Suburban Tool, Inc.     All rights reserved. All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326 Phone:  (248) 391-7800     Fax:  (248) 391-7462 E-mail:   tools@subtool.com