Suburban Tool, Inc.
Taft-Peirce Metrology

Workholding & Inspection Equipment

                           SEARCH KEYWORDS

  

Home Products Support
TOOLMAKER'S KNEE

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


9180 Toolmaker's Knee
  • Made of close-grained, heat treated cast iron.
  • Pads on the back of each angle are finished for clamping and reference purposes.
  • May be used on any face or edge for layout, inspection or machining.
  • Adjacent sides square within 0.0001".
  • Opposite sides parallel within 0.0001".
MODEL # SIZE TABLE FACE ANGLE FACE WT (#)
LENGTH WIDTH HEIGHT LENGTH WIDTH THICKNESS LENGTH WIDTH THICKNESS
9180-G 3" 2-1/2" 4" 2-1/2" 1" 3/4" 2-1/2" 1-7/8" 11/16" 4
9180-S 3" 2-1/2" 4" 2-1/2" 1" 3/4" 2-1/2" 1-7/8" 11/16" 4

  "-G" MODELS HAVE A GROUND FINISH.
  "-S" MODELS HAVE A SCRAPED FINISH.


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIAL SIZES AVAILABLE UPON REQUEST

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.
4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:  tools@subtool.com