Suburban Tool, Inc.
Taft-Peirce Metrology

Workholding & Inspection Equipment

                           SEARCH KEYWORDS

  

Home Products Support
LEVELING STRAIGHT EDGES

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


9168 Leveling Straight Edge
  • Designed for setting up & leveling machinery.
  • I-beam construction for maximum strength.
  • Cored & ribbed for balanced lightness & rigidity.
  • Made of close-grained, heat-treated cast iron.
  • Top and bottom surfaces are ground or hand scraped flat, straight, and parallel.
MODEL # SIZE STRAIGHT* PARALLEL WT (#)
LENGTH WIDTH THICKNESS
9168-36G 36" 8" 2-1/2" 0.0002" 0.0002" 60
9168-36S 36" 8" 2-1/2" 0.0002" 0.0002" 60
9168-48G 48" 8" 2-1/2" 0.0003" 0.0002" 70
9168-48S 48" 8" 2-1/2" 0.0003" 0.0002" 70
9168-60G 60" 8" 2-1/2" 0.0004" 0.0003" 100
9168-60S 60" 8" 2-1/2" 0.0004" 0.0003" 100
9168-72S 72" 8" 2-1/2" 0.0005" 0.0003" 125
9168-96S 96" 9-1/2" 3" 0.0006" 0.0003" 410
9168-120S 120" 11" 3-3/4" 0.0006" 0.0003" 510

* Overall straightness is precisely checked at the factory to within the tolerance listed for each size. In use, however, straightness is a function of proper selection of support points. While this is not critical for the 36” and 48” sizes, the support points should be located 6” to 18” from the ends for the 60” size, 13” to 20” for the 72” size, 20” to 26” for the 96” size & 25” to 30” for the 120” size.

"-G" MODELS HAVE A GROUND FINISH.
"-S" MODELS HAVE A SCRAPED FINISH.


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.
4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:  tools@subtool.com