Suburban Tool, Inc.
Taft-Peirce Metrology


Workholding & Inspection Equipment

                           SEARCH KEYWORDS

  

90° INDICATOR GAGE
Model Number: 47-600

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.

ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


Model 47-600 90 Degree Indicator Gage
  • Provides the fastest means for checking the accuracy of right angles.
  • In repetitive production line applications or in variable inspection room use, the instrument quickly indicates plus or minus errors to 0.0001".
  • Consists of a triangular shaped comparator, which carries two contact points in adjustable brackets and a dial indicator, and a precision square, which is ground and lapped to an accuracy of 0.0001" over its entire height.
  • Both major components of the indicator gage are made of hardened alloy steel. The dial indicator is mounted to A.G.D. standards on the upper bracket. These two features assure a long, accurate service life in any environment.
  • The two adjustable brackets are mounted in a t-slot that runs the full
    height of the comparator and are spring-loaded to prevent slipping, when adjusting their position. They can be located to provide a maximum distance between contact points of 17-3/4" or a minimum
    1-1/8". Both brackets are equipped with hand screws for easy
    adjustment without tools.


SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Copyright © 2001-2008 - Suburban Tool, Inc.     All rights reserved.
All trademarks and logos shown are the property of their respective owners.

4141 N. Atlantic Boulevard, Auburn Hills, MI 48326
Phone:  (248) 391-7800     Fax:  (248) 391-7462
E-mail:  tools@subtool.com