http://www.subtool.com www.subtool.com 2011-03-21T02:22:46Z http://www.subtool.com/tp/9209bed_heavy-duty_bench_center_bed.html

"Rigidly

2011-03-21T02:09:36Z http://www.subtool.com/st/b-hd_master-sine_heavy_duty_sine_plates.html

"Our

2011-03-21T02:09:36Z http://www.subtool.com/st/v_precision_toolmakers_vises.html

Solid, one-piece body. Angled center channel provides extra jaw capacity. Moveable jaw pulls into base at 45 to 60 degrees to insure maximum holding power and hold down force, eliminating tilting and lifting.

2011-03-21T02:09:35Z http://www.subtool.com/st/vnc_precision_nc_vises.html

Precision vises designed to bolt easily onto your N/C, milling, or other machine.

2011-03-21T02:09:34Z http://www.subtool.com/st/vbci_cast_iron_vee_blocks.html

Made from close grain cast iron. All models have 90 degree vees.

2011-03-21T02:09:34Z http://www.subtool.com/tp/9131_taft-peirce_universal_vee_blocks.html

"Made

2011-03-21T02:09:34Z http://www.subtool.com/tp/9133-34_open_body_cast_iron_vee_blocks.html

Features “open” body design to reduce weight, and heavy ribbing for added strength. Made of heat treated, close-grained cast iron.

2011-03-21T02:09:33Z http://www.subtool.com/tp/9128-30_taft-peirce_steel_vee_blocks.html

"Designed

2011-03-21T02:09:33Z http://www.subtool.com/tp/9132_solid_body_cast_iron_vee_blocks.html

"Extra-heavy

2011-03-21T02:09:33Z http://www.subtool.com/tp/9146_taft-peirce_comparator_square.html

Base and column made of hardened stainless steel. Indicator bracket made of seasoned cast iron. Packed complete with indicator in a finished wood case with hinged cover.

2011-03-21T02:09:32Z http://www.subtool.com/st/vb_precision_steel_vee_blocks.html

V-blocks are available as singles or matched pairs. Each block comes with one clamp. Available in 60 and 90 degree models.

2011-03-21T02:09:32Z http://www.subtool.com/tp/9141-43_taft-peirce_cylinder_squares.html

Provides one of the most reliable 90 degree reference standards available. Made of high-quality, heat treated alloy steel.

2011-03-21T02:09:32Z http://www.subtool.com/tp/9314_three-axis_reference_square.html

"The

2011-03-21T02:09:31Z http://www.subtool.com/st/cs_steel_cylinder_squares.html

Provides an excellent 90 degree reference. Solid, one-piece steel construction. Heat treated and precision ground.

2011-03-21T02:09:31Z http://www.subtool.com/tp/9165_planer_boring_mill_parallels.html

Rigidly constructed with reinforced ribs. Cored holes at intervals throughout the length provide for easy clamping. Made of heat treated, close-grained cast iron.

2011-03-21T02:09:30Z http://www.subtool.com/st/47600_ninety_degree_indicator_gage.html

The model 47-600 indicator gage provides the fastest means for checking the accuracy of right angles.

2011-03-21T02:09:30Z http://www.subtool.com/tp/9169_taft-peirce_steel_straight_edges.html

Edges precision ground, parallel and straight. All sizes are proportioned for proper balance between rigidity and weight. Made of heat treated alloy steel.

2011-03-21T02:09:30Z http://www.subtool.com/st/se_steel_straight_edges.html

"Extremely

2011-03-21T02:09:29Z http://www.subtool.com/tp/9160-64_taft-peirce_box_parallels.html

Cored to reduce weight and to provide convenient ledges for applying clamps. Made of heat treated, close-grained cast iron.

2011-03-21T02:09:29Z http://www.subtool.com/tp/9168_taft-peirce_leveling_straight_edges.html

Designed for setting up & leveling machinery. I-beam construction for maximum strength. Cored & ribbed for balanced lightness & rigidity.

2011-03-21T02:09:29Z http://www.subtool.com/st/twp_two_way_steel_parallels.html

"Provides

2011-03-21T02:09:28Z http://www.subtool.com/st/p_suburban_tool_four-way_steel_parallels.html

"These

2011-03-21T02:09:28Z http://www.subtool.com/st/se-ci_cast_iron_straight_edges.html

Made of stress-relieved cast iron for maximum stability. Cored and ribbed for increased rigidity and reduced weight.

2011-03-21T02:09:28Z http://www.subtool.com/st/bxp_cast_iron_box_parallels.html

Made of high quality fine grained, stress relieved cast iron. All faces and ends finished square and parallel.

2011-03-21T02:09:27Z http://www.subtool.com/st/ttp_custom_tooling_plates.html

"Tooling

2011-03-21T02:09:27Z http://www.subtool.com/st/ts-custom_tombstone_pallet_fixtures.html

Custom tombstones / pallet fixtures - any size & any shape. Suburban Tool, Inc. keeps a large number of standard size castings in stock, ready to machine to your workholding fixture needs.

2011-03-21T02:09:26Z http://www.subtool.com/st/ttps_plain_tooling_plates.html

"Plain

2011-03-21T02:09:26Z http://www.subtool.com/st/tsr_rectangular_column_tombstone_pallet_fixtures.html

"Rectangular

2011-03-21T02:09:26Z http://www.subtool.com/st/tso_octagonal_column_tombstone_pallet_fixtures.html

"Octagonal

2011-03-21T02:09:25Z http://www.subtool.com/st/tsh_hexagonal_tombstone_pallet_fixtures.html

"Hexagonal

2011-03-21T02:09:25Z http://www.subtool.com/st/tsw_window_type_tombstone_pallet_fixture.html

Window type tombstones / pallet fixtures allow machining on both sides of a workpiece with one setup. Suburban Tool, Inc. keeps a large number of standard size castings in stock, ready to machine to your workholding fixture needs.

2011-03-21T02:09:25Z http://www.subtool.com/st/tst_t-type_tombstone_pallet_fixtures.html

"T-type

2011-03-21T02:09:25Z http://www.subtool.com/st/tslot_t-slotted_square_column_tombstone_pallet_fixtures.html

"T-slotted

2011-03-21T02:09:24Z http://www.subtool.com/st/tsc_square_column_tombstone_pallet_fixtures.html

"Square

2011-03-21T02:09:24Z http://www.subtool.com/st/oc_master-view_fourteen_inch_optical_comparator_overlay_charts.html

Combination Grid / Radius Charts, Grid Charts, Radius Charts, Radius / Angle Charts, and Screw Thread Charts for the Master-View 14

2011-03-21T02:09:23Z http://www.subtool.com/st/mvdro2_master-view_digital_readouts.html

The main advantage of the MV-DRO2 over competitive models is its part view capability. Using part view, you can really get the relationship of all of a part’s features to each other.

2011-03-21T02:09:23Z http://www.subtool.com/st/mv14ac_master-view_fourteen_inch_optical_comparator_accessories.html

Cabinet base, hood, remote digital readout, stage centers, rotary base vise and v-block for the Master-View comparators.

2011-03-21T02:09:23Z http://www.subtool.com/st/mv14_master-view_basic_fourteen_inch_optical_comparator.html

14 inch optical comparator with digital LCD scales on X and Y axes. Surface illumination through duplex fiber optics.

2011-03-21T02:09:22Z http://www.subtool.com/st/mv14p_series_master-view_fourteen_inch_optical_comparator.html

14 inch optical comparator with the Fagor NV-20 2-axis digital readout. Surface illumination through duplex fiber optics.

2011-03-21T02:09:22Z http://www.subtool.com/st/mv14q_series_master-view_fourteen_inch_optical_comparators.html

14 inch optical comparators with the Metronics Quadra-Chek 200 series digital readout with geometric functions. Fiber optic edge detection and digital protractor are available.

2011-03-21T02:09:22Z http://www.subtool.com/st/mv14fd_series_master-view_fourteen_inch_optical_comparator.html

14 inch optical comparator with the Fagor NV-200 3-axis digital readout with geometric functions. Includes fiber optic edge detection and 360 degree digital protractor.

2011-03-21T02:09:22Z http://www.subtool.com/st/mv140se_erect_image_master-view_fourteen_inch_optical_comparators.html

14 inch optical comparator with erect image. Includes Suburban's own MV-14-DRO2 3-axis digital readout with geometric functions.

2011-03-21T02:09:21Z http://www.subtool.com/tp/9806_magnetic_transfer_vee_blocks.html

"Carries

2011-03-21T02:09:21Z http://www.subtool.com/st/mv14s_series_master-view_fourteen_inch_optical_comparators.html

14 inch optical comparators with Suburban's own MV-14-DRO2 3-axis digital readout with geometric functions and art view to show the relationship between all part features.

2011-03-21T02:09:21Z http://www.subtool.com/st/emc_sine-set_electromagnetic_sine_plate_chucks.html

Designed to bolt directly, with little or no indicating, to a SineSet sine plate or compound sine plate of the same size and series.

2011-03-21T02:09:20Z http://www.subtool.com/tp/9805_magnetic_transfer_parallels.html

Carries the magnetic holding force well above the working surface of practically any style or make of electromagnetic or permanent magnetic chuck. Made of alternate laminations of brass and highly permeable, soft iron.

2011-03-21T02:09:20Z http://www.subtool.com/st/rmc_round_permanent_magnetic_chucks.html

Ceramic magnets never lose their strength. Back surface of the aluminum chuck body has tapped holes and turned counterbore for convenient mounting on machines.

2011-03-21T02:09:19Z http://www.subtool.com/st/dmb_magnum-force_permanent_magnetic_surface_grinder_chucks.html

Permanent magnetic chucks with dual magnets. Dual magnets provide 120 percent more power and positive shut-off for easy workpiece removal.

2011-03-21T02:09:18Z http://www.subtool.com/st/mtc_magnetic_toolmakers_chucks.html

Top, bottom and end magnetize simultaneously. All models precision ground flat, square and parallel to an overall accuracy of 0.0005.

2011-03-21T02:09:18Z http://www.subtool.com/st/lm_lift-master_permanent_magnetics_lifts.html

Allows one person to do the material loading and handling that once required two or more.

2011-03-21T02:09:17Z http://www.subtool.com/st/holding_power.html

Suburban Tool, Inc. - FILE or PAGE NOT FOUND

2011-03-21T02:09:16Z http://www.subtool.com/st/emcb_electromagnetic_surface_grinder_chucks.html

Chucks are completely sealed against dirt and liquids. Longitudinal (lengthwise) or transverse (crosswise) pole models available.

2011-03-21T02:09:15Z http://www.subtool.com/st/cc_electromagnetic_chuck_controls.html

Specifically matched to the input requirements of Suburban's electromagnetic chucks. 110-115 volts A/C in. 110 volts DC out.

2011-03-21T02:09:14Z http://www.subtool.com/st/sm5c_spin-master_spin_index_fixture.html

Uses standard 5C collets. Index plate with 36 holes for direct indexing in 10 degree steps and is marked in 5 degree increments. 10 vernier holes provide 1 degree indexing.

2011-03-21T02:09:13Z http://www.subtool.com/st/pmv2_punch_master_spin_index_fixture.html

48 position index plate for hard index every 7-1/2 degrees. Ball and race design with 36 balls under preload for minimum deflection.

2011-03-21T02:09:13Z http://www.subtool.com/st/mm25r_mini-master_spin_index_fixture.html

72 position index plate allows an index every 5 degrees. Uses standard ER-25 spring collets.

2011-03-21T02:09:12Z http://www.subtool.com/st/mg5cvs1_master-grind_spin_index_fixture.html

5C collet and v-block in one fixture. Two heavy duty 4 inch diameter tapered roller bearings support the spindle.

2011-03-21T02:09:11Z http://www.subtool.com/st/cm5c_collet-master_spin_index_fixture.html

48 index positions, every 7-1/2 degrees. Uses all standard 5C collets. Sindle rides in two sealed, pre-loaded ball bearings.

2011-03-21T02:09:11Z http://www.subtool.com/tp/9205bed_standard_duty_bench_center_beds.html

"Can

2011-03-21T02:09:10Z http://www.subtool.com/tp/9205-08-28_large_capacity_headstocks_tailstocks.html

Can be ordered as optional accessories for standard bench centers, or combined with standard and heavy duty beds. Supplied with 3/4” x 60°, #2 Morse taper centers.

2011-03-21T02:09:09Z http://www.subtool.com/tp/9205_taft-peirce_standard_bench_centers.html

Heavy-duty, cast iron beds are ruggedly proportioned with internal ribbing. Standard bench centers are supplied complete with ground bed, headstock, tailstock and centers.

2011-03-21T02:09:09Z http://www.subtool.com/tp/9204_taft-peirce_intermediate_bench_center.html

Designed to bridge the capacity gap between the Model 9203 Instrument Bench Center and the standard 9205 8” swing models. Can be used in either the vertical or horizontal position.

2011-03-21T02:09:08Z http://www.subtool.com/tp/9205im_bench_center_indicator_mounting_brackets.html

"Designed

2011-03-21T02:09:07Z http://www.subtool.com/tp/9203_taft-peirce_instrument_bench_center.html

Can be used in either the vertical or horizontal position. Head and tailstock made from high-quality alloy steel and heat treated for maximum stability.

2011-03-21T02:09:07Z http://www.subtool.com/tp/9205bed_heavy-duty_bench_center_bed.html

Suburban Tool, Inc. - FILE or PAGE NOT FOUND

2011-03-21T02:09:06Z http://www.subtool.com/tp/9320-212_bench_center_dial_indicator.html

"Model

2011-03-21T02:09:05Z http://www.subtool.com/tp/9205bn_bull-nose_headstock_tailstock_centers.html

Designed specifically to fit the 9205 head & tailstocks.

2011-03-21T02:09:04Z http://www.subtool.com/st/the_sineset_system_of_bolt-together_tools.html

"As

2011-03-21T02:09:03Z http://www.subtool.com/tp/pe105_universal_propeller_protractor.html

Designed to secure an accurate check of blade angle at any point specified by the propellor manufacturer.

2011-03-21T02:09:03Z http://www.subtool.com/tp/9122_sine_block_taper_testing_fixture.html

"Combines

2011-03-21T02:09:02Z http://www.subtool.com/tp/9118_taft-peirce_sine_blocks.html

Tapped holes in the top surface and sides allow a wide variety of work-clamping set-ups. Made of high-quality, heat treated alloy steel. All sizes furnished in a finished wood case.

2011-03-21T02:09:01Z http://www.subtool.com/tp/9123-9229_sine_angle_plates_chucks.html

Available in simple or compound style. Made from close-grained, heat treated cast iron.

2011-03-21T02:09:00Z http://www.subtool.com/st/sv_sineset_sine_vises.html

"Provides

2011-03-21T02:09:00Z http://www.subtool.com/st/sp_sineset_sine_plates.html

"Gage

2011-03-21T02:08:59Z http://www.subtool.com/st/msp_sine-set_permanent_magnetic_sine_plates.html

"The

2011-03-21T02:08:58Z http://www.subtool.com/st/mspc_sine-set_permanent_magnetic_compound_sine_plates.html

"The

2011-03-21T02:08:57Z http://www.subtool.com/st/esp_sine-set_electromagnetic_sine_plates.html

Sine plate and electromagnetic chuck can be used together or independently. The chucks are sealed against dirt and liquids.

2011-03-21T02:08:57Z http://www.subtool.com/st/espc_sine-set_electromagnetic_compound_sine_plates.html

Compound sine plate and electromagnetic chuck can be used together or independently. The chucks are sealed against dirt & liquids, and are submersible.

2011-03-21T02:08:57Z http://www.subtool.com/st/spc_sineset_compound_sine_plates.html

"Gage

2011-03-21T02:08:56Z http://www.subtool.com/st/sineset_compatibility_chart.html

"A

2011-03-21T02:08:56Z http://www.subtool.com/st/sb_sine_bars.html

"Effectively

2011-03-21T02:08:56Z http://www.subtool.com/st/spbm_mill-master_sine_plate_for_milling.html

"Specifically

2011-03-21T02:08:55Z http://www.subtool.com/st/b-sp_master-sine_sine_plates.html

Master-Sine sine plates provide a sturdy and accurate way to grind or measure angles.

2011-03-21T02:08:55Z http://www.subtool.com/st/a-sp_master-sine_compound_sine_plates.html

Master-Sine™ compound sine plates provide a sturdy and accurate way to grind or measure angles.

2011-03-21T02:08:55Z http://www.subtool.com/st/ss_complete_sinesets.html

A complete matched system of bolt-together precision tools in a beautiful, fitted, wooden storage case, at a significant savings.

2011-03-21T02:08:54Z http://www.subtool.com/st/b-ms_magna-sine_permanent_magnetic_sine_plates.html

Magna-Sine magnetic sine plates are equipped with extremely powerful ceramic magnet chucks.

2011-03-21T02:08:54Z http://www.subtool.com/st/a-ms_magna-sine_magnetic_compound_sine_plates.html

Magna-Sine™ compound magnetic sine plates are equipped with extremely powerful ceramic magnet chucks.

2011-03-21T02:08:54Z http://www.subtool.com/st/ap443hkit_tool-master_angle_plate_kit.html

"The

2011-03-21T02:08:53Z http://www.subtool.com/st/ap445_v-step_angle_plates.html

The model AP-445 is an extremely versatile angle plate with a vee, slots and a step for holding a wide variety of workpieces.

2011-03-21T02:08:53Z http://www.subtool.com/st/ura_universal_right_angle_irons.html

"Useful

2011-03-21T02:08:53Z http://www.subtool.com/tp/9191-94_universal_right_angle_irons.html

Ideal for squaring operations. This angle iron’s squareness and parallelism makes it useful for clamping work in several different positions. Made of stress-relieved, class 40 cast iron.

2011-03-21T02:08:52Z http://www.subtool.com/tp/9180_taft-peirce_toolmaker's_knees.html

"Pads

2011-03-21T02:08:52Z http://www.subtool.com/tp/9185_taft-peirce_slotted_angle_irons.html

Heavily proportioned, ribbed for strength & rigidity. Table faces and angle faces have convenient clamping holes and slots for fast work mounting and set-ups. Made of heat-treated, close-grained cast iron.

2011-03-21T02:08:52Z http://www.subtool.com/tp/9195_taft-peirce_magnetic_angle_iron.html

"Combines

2011-03-21T02:08:51Z http://www.subtool.com/tp/9183_taft-peirce_pallet_irons.html

"Ideal

2011-03-21T02:08:51Z http://www.subtool.com/tp/9201-02_taft-peirce_measuring_irons.html

Narrow width offers convenient means of clamping where table room is at a minimum. Made of close-grained, heat treated cast iron.

2011-03-21T02:08:51Z http://www.subtool.com/st/sao_saw_webbed_open_end_slotted_angle_plates.html

These cast iron angle plates are available in webbed and open end styles.

2011-03-21T02:08:50Z http://www.subtool.com/tp/9181_taft-peirce_duplex_angle_irons.html

"Heavy

2011-03-21T02:08:50Z http://www.subtool.com/tp/9166_taft-peirce_box_angle_irons.html

"Combines

2011-03-21T02:08:50Z http://www.subtool.com/st/ap_precision_ground_steel_angle_plates.html

Our precision ground, solid, one-piece angle plates are made from hardened steel.

2011-03-21T02:08:49Z http://www.subtool.com/st/paw_plain_webbed_angle_plates.html

The cast iron angle plates have an extra thick ribbed construction.

2011-03-21T02:08:49Z http://www.subtool.com/st/gaw_giant_slotted_webbed_angle_plates.html

Made of high quality fine grained, stress relieved cast iron. Extra thickness and heavy ribbed construction. Multiple slots for many bolting and clamping possibilities.

2011-03-21T02:08:48Z http://www.subtool.com/st/chuck_holding_power.html

Suburban Tool, Inc. - CHUCK HOLDING POWER INFORMATION

2011-03-21T02:08:48Z http://www.subtool.com/st/mai644_magna-square_magnetic_angle_iron.html

"A

2011-03-21T02:08:48Z http://www.subtool.com/st/tap_t-slotted_webbed_angle_plates.html

These cast iron angle plates provide an accurate vertical base for mounting vises, sub-plates, parts or fixtures. Standard 5/8 T-slots on 6" centers.

2011-03-21T02:08:48Z http://www.subtool.com/st/ab_angle_block_sets.html

These angle block sets provide a quick and accurate means for setting or checking angles.

2011-03-21T02:08:47Z http://www.subtool.com/st/cap_compound_angle_plates.html

Solid, single piece construction provides stable and reliable positioning for compound use. Ground vees are included for the convenient holding of small parts.

2011-03-21T02:08:47Z http://www.subtool.com/tp/9151_taft-peirce_precision_tri-blocks.html

"Extremely

2011-03-21T02:08:46Z http://www.subtool.com/st/b123_precision_tri-blocks.html

Our precision tri-blocks are made of hardened steel, ground on all six sides. They are available as single blocks or matched pairs.

2011-03-21T02:08:46Z http://www.subtool.com/st/suburban_tool_terms_of_use.html

The General Terms & Conditions of Suburban Tool, Inc.

2011-03-21T02:08:46Z http://www.subtool.com/st/suburban_tool_sales_policy.html

The General Terms & Conditions of Suburban Tool, Inc.

2011-03-21T02:08:46Z http://www.subtool.com/st/suburban_tool_warranty_registration.html

Online warranty registration for your Suburban Tool, Inc. product.

2011-03-21T02:08:45Z http://www.subtool.com/sitemap.html

Table of Contents for http://www.subtool.com

2011-03-21T02:08:45Z http://www.subtool.com/st/suburban_tool_privacy_policy.html

The General Terms & Conditions of Suburban Tool, Inc.

2011-03-21T02:08:44Z http://www.subtool.com/st/suburban_tool_manufacturers_representatives.html

Locate a manufacturer's representative for Suburban Tool, Inc.

2011-03-21T02:08:44Z http://www.subtool.com/st/suburban_tool_general_terms.html

The General Terms & Conditions of Suburban Tool, Inc.

2011-03-21T02:08:44Z http://www.subtool.com/st/links.html

Welcome to our friendly links page.

2011-03-21T02:08:43Z http://www.subtool.com/st/government_contracts.html

Suburban Tool, Inc. \ The Taft-Peirce Metrology Company supplies many of its products to military bases & other government organizations under government contracts.

2011-03-21T02:08:43Z http://www.subtool.com/st/suburban_tool_contact_us.html

"To

2011-03-21T02:08:43Z http://www.subtool.com/idx_vises_and_sine_vises.html

Suburban Tool has v-blocks of all sizes in steel & cast iron.

2011-03-21T02:08:42Z http://www.subtool.com/idx_steel_and_cast_iron_v-blocks.html

Suburban Tool has v-blocks of all sizes in steel & cast iron.

2011-03-21T02:08:42Z http://www.subtool.com/st/contract_machining.html

Suburban Tool, Inc. - CONTRACT MACHINING

2011-03-21T02:08:42Z http://www.subtool.com/st/vc_vacuum_sine_plate_chucks_and_pumps.html

"Provides

2011-03-21T02:08:41Z http://www.subtool.com/st/bx_wooden_storage_cases.html

"Our

2011-03-21T02:08:41Z http://www.subtool.com/st/suburban_tool_special_orders.html

"Almost

2011-03-21T02:08:41Z http://www.subtool.com/idx_cylinder_magnetic_comparator_reference_squares.html

Suburban Tool's Taft-Peirce line of bench centers are available in sizes to fit every job.

2011-03-21T02:08:41Z http://www.subtool.com/idx_pallet_fixtures_tombstones_tooling_plates.html

Suburban Tool has many sizes & shapes of pallet fixtures & tooling plates in stock.

2011-03-21T02:08:40Z http://www.subtool.com/idx_parallels_and_straight_edges.html

Suburban Tool has parallels of all sizes in steel & cast iron.

2011-03-21T02:08:40Z http://www.subtool.com/st/pg_planer_gage.html

1/4" to 10" range. Fitted wooden case and 3" extension included.

2011-03-21T02:08:40Z http://www.subtool.com/idx_magnetic_chucks_sine_plates_and_tools.html

Suburban Tool has magnetic tools for all your ferrous holding needs.

2011-03-21T02:08:39Z http://www.subtool.com/idx_spin_and_index_fixtures.html

Suburban Tool's has an index fixture for all you needs.

2011-03-21T02:08:39Z http://www.subtool.com/idx_optical_comparators_and_accessories.html

Suburban Tool has 14" comparators to fit any budget.

2011-03-21T02:08:39Z http://www.subtool.com/idx_angle_checking_and_setting_tools.html

Suburban Tool has angle setting & checking equipment in all shapes & sizes.

2011-03-21T02:08:38Z http://www.subtool.com/st/c36_precision_steel_cubes.html

Solid, one-piece steel construction. Top, bottom and sides ground flat, square and parallel.

2011-03-21T02:08:38Z http://www.subtool.com/st/master_height_height_gages.html

Allows one person to do the material loading and handling that once required two or more.

2011-03-21T02:08:38Z http://www.subtool.com/idx_bench_centers_and_accessories.html

Suburban Tool's Taft-Peirce line of bench centers are available in sizes to fit every job.

2011-03-21T02:08:38Z http://www.subtool.com/st/about_suburban_tool.html

Suburban Tool, Inc. has 40+ years experience in manufacturing the highest quality workholding products and inspection equipment.

2011-03-21T02:08:37Z http://www.subtool.com/st/suburban_tool_whats_new.html

MV-140-SE Master-View Optical Comparators with Erect Image. Includes Suburban's own MV-14-DRO2 3-axis digital readout with geometric functions.

2011-03-21T02:08:37Z http://www.subtool.com/idx_precision_1-2-3_setup_tri-blocks.html

Our precision tri-blocks are made of hardened steel, ground on all six sides. They are available as single blocks or matched pairs.

2011-03-21T02:08:37Z http://www.subtool.com/idx_angle_blocks_irons_plates.html

Suburban Tool has a wide variety of precision angle plates in both cast iron and hardened steel.

2011-03-21T02:08:37Z http://www.subtool.com/

Suburban Tool, Inc. - MANUFACTURER OF PRECISION WORKHOLDING & INSPECTION EQUIPMENT

2011-03-21T02:08:36Z